AUDIO RESEARCHREF3 PRE-AMPusedAUDIO RESEARCH REF3 PRE-AMPAUDIO RESEARCH REF3 PREAMPLIFIER Specifications: FREQUENCY RESPONSE +0 -3dB 0.2Hz to 200kHz at rated output. (BALANCED, 200k ohms load.) DISTORTION (THD) Less than .01% at 2V RMS Balanced outp...3500.00

AUDIO RESEARCH REF3 PRE-AMP

Listing ID: lisafjjc Classified 
 Listed  · 603 Views

audioadvisors 

member since January 1970

Audio Advisors  Verified Dealer

Last 12 months
All-time141100.0%

7 Watchers

Time Left: Listing Sold

This listing has ended.

Condition
7/10
Payment methods
Ships fromWest Palm Beach, FL, 33409
Ships toUnited States
Package dimensionsunspecified
Shipping carrierunspecified
Shipping cost
Original accessoriesRemote Control, Box
AverageResearch Pricing

 

AUDIO RESEARCH REF3 PREAMPLIFIER

 

Specifications:
FREQUENCY RESPONSE
+0 -3dB 0.2Hz to 200kHz at rated output. (BALANCED, 200k ohms load.)

DISTORTION (THD)
Less than .01% at 2V RMS Balanced output.

NOISE & HUM
2.7µV RMS residual IHF weighted balanced noise output with volume at 1 (106dB below 2V RMS output.)

GAIN
Main output (SE or BAL input): 11.6dB Balanced output, 5.6dB Single Ended output.
Tape output: 0dB.
(Processor input: 0dB Balanced.)

INPUT IMPEDANCE
120K ohms Balanced, 300K ohms SE

OUTPUT IMPEDANCE
600 ohms Balanced, 300 ohms SE main (2), 20K ohms minimum load and 2000pF maximum capacitance.

OUTPUT POLARITY
Non inverting

MAXIMUM INPUTS
20V RMS maximum Balanced, (10V RMS SE).

RATED OUTPUTS
2V RMS (1V RMS SE) into 200K ohm balanced load (maximum balanced output capability is 30V RMS at less than 0.5% THD at 1kHz).

POWER SUPPLIES
Electronically regulated low and high voltage supplies. Automatic 40 sec. warm-up/brown-out mute.
Line regulation better than .01%.

TUBE COMPLEMENT
(4) 6H30P plus (1 each) 6L6GC and 6H30P in power supply.

POWER REQUIREMENTS
100-135VAC 60Hz (200-270VAC 50/60Hz) 125 watts.

OTHER
Inputs (7): CD, TUNER, VIDEO, PHONO, AUX1, AUX2, PROCESSOR. (XLR and RCA connectors).
Outputs (3): 2 main, 1 tape (XLR and RCA connectors).
Controls: Volume (104 steps), Select Input.
Push Buttons: Power, Proc, BAL/SE, Mute.

DIMENSIONS
19" (48 cm) W x 7" (17.8 cm) H (standard panel) x 15½" (39.4 cm) D.
Handles extend 1 ½" (3.8 cm) forward of the front panel.

WEIGHT
29.6 lbs. (13.5 kg) Net; 43 lbs. (19.5 kg) Shipping.

 

BUYER PAYS SHIPPING AND INSURANCE 

For a Complete listing of all of our specials, please visit: 

https://audioadvisors.com/closeouts/

Questions for the seller
Hello, i believe this model came with a remote. Will it come with the original remote?
Yes it comes with the original remotes
Are there any pictures inside?
Those are actual photos of our unit they were just taken in our white box., We can provide you with additional pictures Rudi
please send me additional pictures
Sure we can do that. When I return to the store Monday I will organize some additional pictures which I will post in our listing Regards
Could you please post the actual photo of the preamp?...what's posted here is an Audio Research stock photo.
Those are actual photos of our unit they were just taken in our white box. Have a great day, Rudi
Hello, has the unit been tested? Service history? Why the 7/10 rating?
Hi I personally tested this unit and it works great, I'm big on imaging and soundstage and this preamp exceeded my expectations. I received this unit as a trade in, the previous owner was a perfectionist and this was his baby. This Pre-amp is in excellent condition please examine the pictures this is the actual unit. Regards Rudi
Rudi you will need 20 amp power line to make it work right?
No it doesn't require a 20 amp circuit, per my last conversation with ARC they use the 20 amp cord because the cord provides more contact surface. Regards Rudi
Rudi the prong connectors will fit the 15 amp then? It comes with power cord right?
Yes sir the power cord is included and it inserts into the standard wall outlet. Regards Rudi

Ask the seller a public question

You must log in to ask a question.

Return Policy

Return Window

Returns are not accepted on this item.