This item has been sold via another Auction Site: Please See my other Listing for High end Brands


Technics SP10R Direct Drive  -  With Acoustand Delrinium Plinth XL Version which is heavier and better than the smaller one offered by Acoustand. Upto 3 Tonearms can be mounted for this Plinth!

 

This Table Needs no introduction a True World-Class Turntable that will give other manufacturers a run for their money even for tables worth 5 times its price tag!,

SuperSpeed Stability and musical-The Plinth is by far one of the best you can get! I personally think this is even better than that bell ringing cast iron.

The SP10R was used for less than 3 weeks, only and is now packed, the decision to sell was well before it arrived, it took 15 months for Technics to deliver this table. You can get a mint condition unit without the hassle and waiting times.

The setup you see here is a complete system with 3 arm boards made from different premium materials and finishing. All that is needed is to mount your arm! No need to wait for fabrication or delays from various manufacturers!



Downgrading our rooms so this Table has to go, just arrived after 15 months of waiting. The SP10R is in Mint Condition the Table is also in mint condition. Both Look Brand New!!!


We mounted one arm to try out so the original arm board has a hole drilled into it but can still be reused for another arm. So the Aluminium Mounting board is not in Mint Condition, i would rate this arm board at 7/10


The Acoustand Plinth is an XL Version with slightly thicker edges and allows up to 3 arms. This is also slightly larger than the average Acoustand Plinth and more heavier by a few kg. The ability to mount more arms requires more weight and stability.


We have fitted the Plinth with ISOAcoustic Feet! These are worth a few hundred bucks! it makes a massive difference to the SQ.

What will you Get.........

1 X SP10R Mint Condition, With Original Box and Manuals & Power Supply.

1x Acoustand Delrinium Plinth system designed specifically for the Technics SP10R

4 X IsoAcoustics Gaia series Feet for Leveling and decoupling from your platforms

3 X Arm Boards, 1 of each of the following Pure Copper, Pure Stainless Steel and Pure Aluminum. (2 are Not Used)



Optional: For extra 500 dollars i can throw in a Genuine Original Micro Seiki copper Mat CU180, this is the original one made from Gunmetal, not the fakes sold on eBay!


No Tonearm or cartridge is included, I do have the Acoustical System AXIOM Aniversary up for sale if you like but that is another price altogether. I also have a Hanna Umami Cartridge brand new up for sale.


Shipping World Wide, The Unit works on Any Voltage!

Shipping is FedEx Only

Prefer Bank Wire Is US Dollars alternatively  For Paypal there is a 5% Receivers Fee buyer must cover.


Any questions just ask,

The shipping quote is just a placeholder till I know your destination. Paperwork for invoices can be adjusted for imports..

Condition:

The SP-10R is Mint!

The Plinth is in 9.5/10 Condition (Looks New)

The ISo Acoustic Gaia Feet are Mint

The Arm boards are New both Copper and Stainless Steel.

The Aluminum Armboard was drilled by Acoustand for an Acoustical system arm, however, this still can be used again for other arms. Aluminium armboard is 6/10




The Arm Boards, the one we used has a hole drilled into it and some scratches and a hole! but can be reused for other tonearms easily.

The Copper arm board with electroplating finish and pure mirror finish Stainless steel has a fine mirror finish

Will Ship in 3 Boxes,

How much it cost me:

Price: SP10R (Purchased for 10,000 dollars) 15 months wait time
Price: Plinth Purchased for 4000 Dollars XL Version (Took 8 months) (1 Aluminum Armboard) The XL Version is higher grade than the normal plinth. It's heavier and larger.
Price: ISOAcoustics Gaia Feet: 600 dollars
Price: Pure Copper Armboard, 1100 dollars (Pure Copper with Electroplating Finish)
Price: Pure Stainless Steel: 850 dollars (Pure Stainless Steel with Mirror Finish)


The Arm boards took 4 months to receive from the date of order.

Total: 16,600.00 Dollars (Not to mention the shipping cost and time for fabrication)

Optional 500 dollars Copper Mat From Micro Seiki CU 180 Original one, not the fakes sold on eBay. Made from Gun Metal.




Price is very Firm on this for a quick sale. Not willing to negotiate too much..

Works on any voltage worldwide. Will Ship World wide Via FedEx Express.