DVD and CD Player

VDA-1 is the perfect upgrade for any CD or DVD based system with a digital audio output. Careful design layout and short signal paths are used for optimum performance and flexibility. Inputs are via Toslink optical or RCA coaxial. The signal is then fed into a Burr Brown DIR1701 low jitter input receiver, then to a Burr Brown PCM1716 digital to analog converter. The analog output is routed through a Class A output stage utilizing a Burr Brown OPA2132 opamp. All signal path resistors are Vishay metal film types with polystyrene filter capacitors. An external 14vAC power supply is included.

150w x 2, 54 lbs

7 channel Receiver used for HT and Pre Amp Duties

pr, 6.5in woof, 1in twtr

powered, 10 in woof,, 50 lbs

Silver / Copper Proprietary mix

This reference quality speaker cable is extremely neutral. It can be used for all levels of audio systems. This cable is made from two runs per channel of twisted together Belden 89259, a teflon insulated coaxial cable with copper conductors. This is then covered in heatshrink and Techflex. Terminated with your choice of Cardas Silver/Rhodium Spade Lugs. WBT Compression Spade Lugs, WBT Expandable Straight Bananas or WBT Expandable Angled Bananas. Any combination of lengths and/or connectors are available on request.

This Power Cord is made from Belden's 19364 ,14 gauge, 3 conductor, foil shielded cable. It is terminated with the WATTGATE 320 IEC at one end and a Marinco 5266 AC plug on the other. All the connectors are treated with Caig Labs ProGold. The cable is covered with a Techflex sheathing. This cord offers incredible sound for very little money.

The enclosure is available in 14 ga. black or gorgeous stainless steel (your choice). It includes heavy chassis dampening, ten 20 amp hospital grade outlets, audiophile grade filter capacitors, hand soldered 10 AWG silver/copper/Teflon internal wiring, thermal breaker on/off switch, surge protection and a removable C-7 power cord with 20 AMP IEC.

Traps for boomy base