Nagra HD Amps, HD Pre-Amp & DAC X
Listed · 73 Views
Time Left: None
New Retail Price:$240,000.00
$142,000.00
Condition | |
Payment methods | Contact seller |
Contact seller after sale to pay viaVISA/Mastercard, Certified check, Personal check or Wire Transfer | |
Ships from | Richmond, Surrey, TW10 5DL |
Ships to | Worldwide |
Package dimensions | 16.0" × 23.0" × 30.0" (80.0 lbs.) 16.0" × 23.0" × 30.0" (80.0 lbs.) 23.0" × 20.0" × 20.0" (40.0 lbs.) 23.0" × 20.0" × 20.0" (40.0 lbs.) |
Shipping carriers | UPS or FedEx |
Shipping cost | Log in to see price |
Original accessories | Remote Control, Box, Manual |
Average | Research Pricing |
Complete Nagra system comprising one Pair HD monoblocks (2023), HD Pre-Amp (2021) and DAC x (2021)
All as new complete with all original flight cases and accessories.
ELECTRONICS
Power: | 250 W RMS per channel into 8 Ω 30 W pure class A 1000 W RMS on lower impedance |
Sensitivity: | 1 V or 2 V RMS |
Bandwidth: | 0 Hz to 120 KHz, +0/-0.5 dB |
Crosstalk: | Not related for mono amplifiers |
Signal-to-noise ratio: | Typically 110 dB ASA “A” weighted |
THD+N: | < 0.03% |
Input type: | XLR balanced RCA unbalanced |
Input impedance: | 88 KΩ on balanced input 44 kΩ on unbalanced input |
DC filter: | Toggle switch allows to cut the DC of incoming signals |
Protection: | Overheating > +70° C (158° F) |
Remote in and out: | 1/8″ jacks in and out can trigger the amplifier on or off from a Nagra MPS or a home automation system |
Power cord: | IEC C19 this is not the standard IEC but a larger 20A plug |
MONITORING
Nagra modulometer, precision measurement tool
Clipping LED
Intensity can be adjusted, from off to full bright
HD Pre-Amp
New £60000 Asking £35000
2 Years Old, Latest Spec
Consumption: | 1200 W max less than 1 W in standby and Auto mode | ||||||||||||||||||||
Weight: | 56 Kg (123.4 lb) each unit | ||||||||||||||||||||
Size: | Width 23.8 x Height 64.4 x Deepness 54.2 cm (9.3 x 25.3 x 21.3″) | ||||||||||||||||||||
Operating range: | 90 – 110 V or 110 -132 V or 180 – 264 V a.c. 50 – 60 Hz
TECHNICAL SPECIFICATIONELECTRONICS
|
HD DAC X
New £58500/ Asking £34000
2 Years Old Latest Spec
Digital inputs: | 1x AES/EBU, 2x S/PDIF, 2x NAGRA-LINK, 1x Optical, 1x Audio USB (UCA2) |
Analog outputs: | 1 stereo RCA 1 stereo XLR |
Output level: | 1.5 VRMS |
Output impedance: | < 200 ohms |
Analog output Noise level: | -128 dBr @ 1 kHz 1.5 V Unweighted |
Distortion: | < 0.02 % @ -20 dBfs < 0.005 % (H2 filtered) @ -3 dBfs |
Frequency Response: | 5 Hz – 40 kHz +0 / -1 dB |
Crosstalk: | > 110 dB @ 1 kHz > 100 dB @ 20 kHz |
Inter-channel phase | < 0.05 ° @ 1 kHz < 0.3 ° @ 20 kHz < 0.5 ° @ 50 kHz |
Remote automation: | Input 1x 3.5mm (1/8”) stereo jack socket – Input command Output 4x 3.5mm (1/8”) stereo jack socket – Output switching by relay |
Home automation: | 1x SUB-D9 connector – RS232 115200 bits/s, 8 data bits, no parity, 1 stop bit |
Mains power: | 100V~, 115V~, 120V~, 127V~, 230V~ or 240V~ NOT ADJUSTABLE – ±10%, 50-60Hz |
Power consumption: | 170W max |
Mains fuse: | S230V~ to 240V~ -> T 2A L (FST 5x20mm 250V) 100V~ to 127V~ -> T 3.15A L (FST 5x20mm 250V) |
Operating temperature: | +15°C to +35°C (+59°F to +95°F) – moderate climate |
Operating environment: | Indoor only – IP30 |
Dimensions: | Power supply chassis (HD PSU) 433x436x121 mm (17.05×17.17×4.76 in) Audio device chassis 433x436x121 mm (17.05×17.17×4.76 in) |
Weight: | Power supply chassis (HD PSU) 16.5 kg (36.38 lb) Audio device chassis 13.5 kg (29.77 lb) |
No questions have been asked about this item.
Ask the seller a public question
You must log in to ask a question.
Return Policy
Return Window
Item can be returned within 7 days of receipt.
General Terms
Items must be returned in their original condition, with all included packing materials and no signs of use. Buyer assumes responsibility for all shipping return costs unless the item was not received as described.
Refunds
Buyer will receive a full refund in the original payment method less any shipping charges.