VAC Renaissance Mk V with Phono

Hi,
VAC has release new versions of their amps, so with holiday shopping comes upgrades! Here is your chance to get a very high quality VAC pre (also selling amps to go with it if you would like a package deal) with the built in phono stage at a great deal as we make room for new inventory. 

Details:
The line stage circuit is the same transformer- coupled Class A1 balanced triode design found in the Statement Line Stage. The external power supply has dual-mono recti cation and ltering of the crucial high voltage supplies for superb, spacious imaging and great preservation of nuance. The remote volume control is of the direct-acting analogue type and continuously variable, so you easily can the precise level that makes the music snap into focus.
Vinyl lovers may specify the optional MM MC phono stage, which features three twin triodes operating in pure Class A1, variable MC impedance loading, and purely passive, precise RIAA equalization. The circuit topology is derived from the Signature Mk IIa SE, di ering principally in the number of tubes employed, and uses the same premium MC input transformers. The results rival and exceed those delivered by many more costly separate phono stages. You should expect nothing less of a VAC.

Specs:

Gain	10 dB
Frequency Response	Flat over audio band –3 dB bandwidth 5 Hz – 210 kHz
Inputs	2 sets balanced/RCA selectable inputs Optional  1 MM and 1 MC (or additional RCA line input if phono is not fitted)
Outputs	1 set RCA 1 set balance XLR (EIA “pin 2 hot” studio standard)
Tubes	2x 7308, 6922, E88CC, ECC88, or 6DJ8 twin triodes
Absolute Phase	Correct from all inputs to all outputs
THD	<0.009% @ 1 kHz, 1 V RMS
Maximum Output	8 V RMS
Output Impedance	> 150 ohms, 20 Hz - 20 kHz, static (i.e., not dependent upon feedback)
Maximum Input	Infinite signal (attenuation precedes the gain circuitry)
Recommended Output Load	< 300 ohms
Power	External power supply, detachable umbilical cable, detachable IEC power cord
Voltage	May be factory configured for operation at 100, 120, 220, or 230/240 volts
Power Cord	Detachable power cord, standard IEC power receptacle
Remote Control	included
Illumination	Illuminated logo may be switched to bright, dim, or off
Finish	Hand-rubbed gold-flake gloss black lacquer with chrome knobs standard. Hand-rubbed metallic gloss silver lacquer with chrome knobs special order with additional cost.
Warranty	Two years parts and labor, excluding tubes (USA, see manual for full details)
Dimensions (H x W x D)	Audio chassis (not including knobs and connectors): 4" x 18" x 16" Power supply (not including connectors): 4.3" x 6" x 13"
Shipping Weight	44 lbs.

---

Optional Phono Stage Technical Specifications

Tubes	3x 12AX7
Gain	44 dB MM 62 or 68 dB MC (switchable on units made after September 1, 2017)
Frequency Response	RIAA standard +/- 0.2 dB (20 Hz - 20 kHz) -3 dB bandwidth 10 Hz - • 80 kHz
Channel Separation	> 77 dB @ 1 kHz
MC Load Impedance	selectable, 470, 300, 250, 200, 150, and 100 ohms
Overload	117MV @ 1kHz = 8 volts RMS output; 460MV @ 10kHz
Residual Noise	Less than 3MV at output (s/n ratio greater than approx. 69db)

Customer is responsible for shipping, taxes, and fees associated to the sale (will be added on after). 

Thank you,
Call / email me if you have any questions:
Shawn Mathew
631-240-3198
[email protected] 
www.newlifeaudio.com

Brands: Von Schweikert Audio, Valve Amplification Company, Mola Mola, Lumin, REL Acoustics, Martin Logan, Sanders Sound Systems, Rogue Audio, ELAC, MasterBuilt Audio, Kimber Kable, WyWires, Marantz, Definitive Technology, Polk, Sony, Samsung, LG, JVC, Epson, Modulum, AudioQuest, Coastal Source, B&W, and many more!