Mark Levinson No.32 Reference Preamplifier

Mark Levinson No.32 Flagship Preamp 

No.32 Reference Preamplifier in good condition, low hours and works perfectly. Original boxes remote, manual, 2 DC cables, white gloves and power cord. Local pickups are recommended so you can fully inspect the unit and be 100% satisfied. If shipping requires, I will cover shipping if you use PayPal with friends and families. ( a value of $450 save ). Audition is available for serious buyer. 

               …….   NO PHONO.  ……



** Sound wise this No.32 is the best sounding Preamp mark Levinson has ever made, Far superior to the 326s, 320s, 380s, 26s and etc..
** Don’t miss this rare chance to own one of the best all time preamps. ** 

                                               
Specifications:
Description: Line-level preamplifier with optional phono stage. 
Inputs: 3 pairs balanced (XLR), 5 pairs single-ended (RCA, optional), 2 
pairs phono (XLR or RCA), 2 Controller/DC cable connectors, ground 
terminal. Outputs: 2 pairs balanced (XLR), 2 pairs single-ended (RCA), 1 
pair record-out (XLR), 2 pairs record-out (RCA). Controller connectors: 
IEC AC mains receptacle, ground terminal, 2 Controller/DC cable 
connectors, three 3.5mm mini-jacks (for IR input, trigger out, trigger 
in), 3 Mark Levinson Link communications connectors, 6-pin RJ-11 RS-232 
port, two 8-pin RJ-45 control ports (PHASTLink;r-compatible). Maximum 
voltage gain: 0, 6, 12, or 18dB (line stage); 40, 60dB (optional phono 
stage). Volume control range: 80.0dB. Gain resolution: 0.1dB steps above 
23.0 on display (-57dB), 1.0dB steps below 23.0 on display (-57dB). 
Input overload: 2V on XLR, 1V on RCA (gain set to +18dB); 4V on XLR, 2V 
on RCA (gain set to +12dB); 8V on XLR, 4V on RCA (gain set to +6dB); 16V 
on XLR, 8V on RCA (gain set to 0dB). Frequency response: 10Hz-40kHz, 
±0.1dB. Input impedance: 100k ohms. Output impedance: less than 10 ohms 
on XLR, less than 20 ohms on RCA. Maximum output (main outputs): 16V on 
XLR, 8V on RCA. THD+noise: less than 0.001%. Crosstalk: better than 
-120dB, any input to any output, input unterminated; better than -140dB, 
input terminated. Residual noise: 20Hz-20kHz; better than -120dBV, 
input terminated. Mains voltage: 120V 50 
or 60Hz (factory-set).  

Dimensions: 
Controller: 19.5" W by 3" H by 13" D. 

Preamplifier: 19.5" W by 3.2" H by 11.4" D. 

Shipping weights: 

Controller, 60 lbs..  
preamplifier, 46 lbs.. 



 ***   Local pickups only   ***  


Thanks  

Mac