Krell Evolution 900 monos power amp . Voltage : 220 / 100 / 120 / 240 volts. FREE shipping worldwide !

For sell : Krell Evolution 900 monoblocks power amplifier .
Finishing : silver
Voltage : 220 volts original ( convertable to 120 / 240 / 100 volts)

First hand owner . Very low hours used since new . Still original ( no need to recapped )
The owner has so many systems to use in his home .

Condition : 8 of 10 ( due to its age : 1 tiny blemished on front faceplate of one channel power amp - please take a look at photos ) . 
Works perfectly. 
Have original packaging & copy manual.

FREE shipping fee to "most" worldwide destination .

For Paypal payment , must add 5 % fee. 
Also possible to accept payment by Escrow.com (fee approx US$ 190) .
Wire transfer payment also welcome .

If have you have any interested , feel free to ask me. 
Thank you.

Specification : 
Output power : 900 W RMS at 8 Ohms / 1800 W RMS at 4 Ohms  / 3,600 watts into 2 Ohms
Output voltage :  240 V peak-to-peak ,  85 V RMS
Output current :  60 A peak
Slew rate :  90 V/µs
Frequency response :  20 Hz to 20 kHz +0, -0.18 dB ,  <0.5 Hz to 120 kHz +0, -3 dB
Signal-to-noise ratio :  >113 dB, unweighted, referred to full power output .  >122 dB, "A"-weighted
Gain :  25.4 dB
Total harmonic distortion :  <0.02% at 1 kHz, at 900 W, 8 Ohms ,  <0.15% at 20 kHz, at 900 W, 8 Ohms
Input impedance :  Single Ended: 100 kOhms ,  Balanced: 200 kOhms ,  CAST: 70 Ohms
Input sensitivity :  Single Ended or Balanced: 4.55 V rms ,  CAST: 4.55 mA rms
Output Impedance :  <0.023 Ohms, 20 Hz to 20 kHz
Damping Factor (referred to 8 ohms) : >350, 20 Hz to 20 kHz
Transformer :  Two 3000 VA (6000 VA total) for audio circuitry ,  One 10 VA for digital control circuitry
Power Supply Capacitance :  108,000 µF
Power consumption :  Standby: 2 W (High-current standby: 440W) . Idle: 650 W .  Maximum: 5000 W
Heat Output : Stand-by: 7 BTU/hr. (High-current standby: 1500 BTU/hr.  Idle: 2200 BTU/hr. Maximum: 7700 BTU/hr.
Inputs : 1 single-ended via RCA connector , 1 balanced via XLR connector ,  1 CAST via 4-pin bayonet connector
Outputs : 1 pairs Krell binding posts
Dimensions :  17.3 in. W x 9.8 in. H x 26.1 in. D ( 438 mm W x 248 mm H x 662 mm D )
Weight : Shipped: 190 lb., 86 kg