InsiderLutron HW-RPM-4U-120 - 120V HomeWorks Remote Dimming Module
Listed · 7 Views
Time Left: 7 Days
Ending: 06/11 at 04:17 AM ET
New Retail Price: $980.00
$749.00 USD
| Condition | |
| Quantity | 3 |
| Payment methods |      |
Contact seller after sale to pay via Express Checkout | |
| Ships from | Denver, CO, 80222 |
| Ships to | United States |
| Package dimensions | unspecified |
| Voltage | unspecified |
| Shipping carrier | UPS |
| Shipping cost | Free |
| Original accessories | Box, Manual |
 Average | Research Pricing |
This is an open box item with no found cosmetic issues, all accessories and the original box. The box may show some wear and tear. This unit still carries its full manufacturer's warranty and has been fully tested to be sonically flawless. If there are any found issues, please contact us through the Audiogon portal or via [email protected]. We will do everything we can to make it right as quickly as possible.
Lutron HW-RPM-4U-120 is a 4-zone remote power dimming module designed for integration into HomeWorks or HomeWorks Interactive lighting control panels.
Details
HW-RPM-4U-120 - Remote Power Module
Remote Power Modules (RPMs) are used to control lighting, motor, and fan loads. There are several different models of RPMs. Each model controls specific load types. The RPMs are mounted in remote power panels. All RPMs must be connected to a module interface housed within the same panel enclosure. RPMs within an enclosure are connected to the module interface using a Lutron-provided harness. To minimize the effects of single power supply failure, each RPM is
powered by its own internal power supply.
Specifications
- Model Number: HW-RPM-4U-120
- Power: 120 V~ 50 / 60 Hz
- Number of Outputs: 4
- Regulatory Approvals: UL®, CSA, NOM
- Environment Ambient operating temperature: 32 °F to 104 °F (0 °C to 40 °C), 0 to 90% humidity, non-condensing. Indoor use only.
- Cooling: Passive cooling.
- Heat Generated Fully Loaded: 70 BTUs per hour.
- Line-Voltage Connections: Separate line-voltage feeds at the DIN rail terminal blocks for each RPM. Terminal blocks should be tightened to 3.5 in-lb to 5.0 in-lb (0.40 N•m to 0.57 N•m).
- Low-Voltage Communications: Communication harness (included).
- Wiring: Terminal blocks will accept one 18 AWG to 10 AWG (1.0 mm2 to 6.0 mm2) wire or two 18 AWG to 16 AWG (1.0 mm2 to 1.5 mm2) wires.
- Addressing: Manual rotary switch. Counts as 1 of 8 RPM addresses per module interface.
- Diagnostics: LED provided to indicate proper communications with module interface.
- ESD Protection: Meets or exceeds the IEC 61000-4-2 standard.
- Surge Protection: Meets or exceeds ANSI/IEEE standard c62.41.
- Air Gap: Provided when all four circuits are off.
- Fail-Safe Operation: Rotary switch on the RPM allows for manual operation of each load.
- Dimensions: 37⁄8 in (99 mm) wide × 7 in (178 mm) high
- Lamp Buzz: Lamp debuzzing coils
- Interface Suppression: EMI/RFI suppression circuitry
No questions have been asked about this item.
Ask the seller a public question
You must log in to ask a question.
Return Policy
Return Window
Item can be returned within 30 days of receipt.
General Terms
Items must be returned in their original condition, with all included packing materials and no signs of use. Buyer assumes responsibility for all shipping return costs unless the item was not received as described.
Refunds
Buyer will receive a full refund in the original payment method less any shipping charges.
Special Conditions
All returns and support are only available within the continental US.
