JBL Synthesis 2 Array

Lightly used retail demonstration system in original boxes.

JBL SYNTHESIS® TWO ARRAY:

IN SYNTHESIS TWO ARRAY SYSTEMS,THE MAIN LEFT, RIGHT AND CENTER SAMlHFAND SAM2LF loudspeakers feature dual8-inchmid-bass drivers and reproduce high frequencies with a 3-inch Aquaplas-treated aluminum compression driver mounted in a vertical SonoGlass® constant-directivity horn and ultrahigh frequencies with a 1-inch pure-titanium compression driver. Meanwhile, the SAM12X passive crossover manages all the power. It delivers all the realism of today’s most sophisticated digital sources. And it’s all the sonic muscle 16,000-ft.3 rooms can handle.

SAM1HF (3 each)
High-Frequency Horn Module• 3” (7.5 cm) high-frequency compression driver with horn• 1” (2.5 cm) ultra-high frequency compression driver with horn• Maximum Recommended Amplifier Power 300 Watts (RMS) • Impedance 6 Ohms• Sensitivity (2.83V @ 1m) 98dB• Frequency Response 60Hz - 40kHz (with SAM2LF below) •Dimensions(HxWxD):17.3”x8”x11.5”(43.9 cm x 20.3 cm x 29.2 cm)• Weight: 25 lb (11.4 kg)• Textured black finish (no grille)
$ 5,000.00/pr

SAM2LF (3 each)
Low-Frequency Woofer Module• Two 8” (20.3 cm) deep anodized metal/ceramic woofers• Maximum Recommended Amplifier Power 300 Watts (RMS) • Impedance 6 Ohms• Sensitivity (2.83V @ 1m): 92dB• Frequency Response 60Hz - 40kHz (with SAM1HF above) •Dimensions(HxWxD):20”x10”x10.8”(50.8 cm x 25.4 cm x 27.4 cm)• Weight: 29 lb (13.2 kg)• Textured black finish (no grille
***Many other configurations are possible*** ***The HF Horn must always be vertical and never used Horizontal***
Note: SAM1HF and SAM2LF must be combined together and either SDEC-4500 (for bi-amplified active crossover in Syn-One-Array) or SAM12X (for passive 3-way crossover in Syn-Two-Array). $ 3,000.00/pr

SAM12X (3 each)
Passive Crossover for SAM1HF/SAM2LF Modules• Supports one SAM1HF and up to two SAM2LF modules • Compatible with SDEC3000 $ 1,000.00/pr

S2S-EX (2 each)
THX® UltraTM Passive Subwoofer• Speaker type: 15” Passive Subwoofer with dual front-firing ports• Power Rating 1,200 Watts (recommended); 3,200 Watts (peak)• Frequency response: 22Hz - 400Hz• Sensitivity (ground plane): 93dB (1 watt at 1 meter) @ 60Hz • Recommended maximum amplifier power: 800 watts• Nominal impedance: 8 ohms• Transducer: 15” Kevlar®-Kapok cone transducer (Model: W1500H)• Dimensions (H x W x D): 27.5” x 21” x 15” (16.6” with grille) (699mm x 533mm x 381mm) (432mm with grille)• Weight (grille included): 125lbs (56.7kg)
$ 2,500.00/ea

S2A (2 each)
Dipole Ambient Surround Speaker, 100Hz-18kHz , HF (2| 1" compression driver/Bi-Radial" horn; MF(2) 5" full-range drivers , 150 Watts , B7dB , 6Ohms 16" x 11-9/16" x 6-9/16" 406mm x 294mm x 166mm 28 lb/12.7kg $ 1,000.00/ea

SDEC 3000 (2 each) Untested, included as is.

*Note JBL electronics and S4AI surround speakers shown in picture not included.

Buyer pays actual shipping, Paypal, and Audiogon transaction fees.