Anthem MCA-325

The Anthem MCA 325 power amp is perfect for driving the main 3 speakers in your home theater system. Hook them up to you processor and you'll be blown away by the quality of the sound coming at you at 225 amps per channel. I'm selling them only because I'm downsizing my system due to financial reasons.

I'll cap the shipping cost at $50. I you live within a couple hundred miles of Asheville, NC, I can deliver it to you at no charge.

The retail price is based on Anthem's pricing. It's been replaced by a second generation model, but the specs are basically the same. Their new amp retails for $2700 plus tax, so $1500 is a real value.

These specs have been taken from the Anthem site:

POWER OUTPUT (PER CHANNEL)
(Continuous RMS, 20 Hz - 20 kHz, <1% THD)
Impedance 8Ω- 225W

INPUTS / OUTPUTS
Inputs Single-Ended, Balanced, Relay Trigger (3.5-mm Mono Jack)
Outputs Speaker Binding Posts, Relay Trigger (3.5-mm Mono Jack)
SWITCHES
Front Panel Power (On/Off)
Rear Panel 3 On/Off Modes (Trigger, Manual, Auto)
THD AT 100W
at 1 kHz 0.0010%
at 20 kHz 0.015%
IMD AT 100 W
ITU-R (19 kHz + 20 kHz) 0.0005%
SMPTE (60 Hz + 7 kHz) 0.002%
FREQUENCY RESPONSE, 20 HZ TO 20 KHZ
open circuit ± 0.1 dB
8Ω ± 0.1 dB
4Ω ± 0.1 dB
2Ω ± 0.2 dB
OTHER SPECIFICATIONS
SNR, IEC-A, ref. 225 W 120 dB
Power Bandwidth, -3 dB at 200 W into 8 ohms 90 kHz
Slew Rate 30 V/μs
Damping Factor, 20 Hz to 1 kHz 300
Channel Separation, 100 Hz to 10 kHz >65 dB
Input Impedance (RCA / XLR) 10 kΩ / 15 kΩ
Input Sensitivity, 225 W into 8 Ω 1.5 Vrms
Voltage Gain 29 dB