Description

My system has continued to evolve over the past 5 years with the one constant being the Rockport Arrakis 2 bi-amplified speakers. They have continued to amaze me that as my electronics have changed and continued to improve, the Arrakis have continued to grow with the electronics as well. Every time I thought I had reached their sonic limit, I have been proven wrong and I am very happy about that.

I have now completely eliminated all tube based components in my system. I have always felt that if I could get the sound that I wanted without tubes, that would be wonderful but I never thought that would be possible. The combination of the TotalDAC digital front end and the Steve Dobbins Beat SE turntable and LT tonearm paired with the CH Precision P1 phono stage, the CH Precision L10 line stage and the CH Precision M10 amplifiers (run in active bi-amplification mode) have achieved this for me. 
Read more...

Room Details

Dimensions: 33’ × 20’  X large
Ceiling: 12’


Components Toggle details

    • CH Precision C10 DAC
    I have upgraded to the CH C10 replacing the CH C1.2 DAC with X1 power supply.
    • Roon Nucleus Plus

    • Nordost QNET
    Nordost QNET Switch powered by the Nordost QSOURCE LPS.
    • Nordost Odin Gold power cord
    I am using a Nordost Odin Gold power cord for Nordost QSOURCE LPS that powers the Nordost QNET Switch and several Nordost QPOINT resonators.
    • Nordost Valhalla 2 Ethernet Cables (2)
    I am using 2 of the Nordost Valhalla 2 ethernet cables. The first one connects between the QNET Switch and the Roon Nucleus Plus. The second is from the QNET switch to the CH Precision C10 DAC.
    • Nordost Odin 2 XLR IC
    Nordost Odin 2 Balanced IC's from the CH Precision C10 DAC to the CH Precision L10 true monaural preamp.
    • Shunyata Research Everest 8000 Power Distributor
    I am now using the Shunyata Everest 8000 power distributor which has replaced the Shunyata Triton V3 in my system for my front end electronics. I use a Nordost Odin Gold power cord for the Everest.
    • Shunyata Research Hydra DPC 6 V3 power conditioner
    I have the Shunyata DPC 6 V3 power conditioner for my computer based audio gear. I have my Nordost Qsource LPS plugged into the DPC 6 V3. 
    The DPC 6 V3 is powered by an Echole Omnia power cord from a wall outlet.
    • Steve Dobbins The Beat SE
    I have recently replaced my wonderful Steve Dobbins The Beat turntable with Steve's latest turntable, The Beat SE. The Beat SE is a complete and thorough re-design of the original Beat turntable with about 99% of the table different from the original Beat. I have had the original Beat in my system for 8 years and it has undergone several upgrades during this timeframe that always further improved the sonics, but nothing prepared me for the improvement that the Beat SE has made in my analog playback.

    June 29 2021 Update: I just replaced the umbilical power cord connection between the Beat SE power supply and the Beat SE turntable with a new umbilical power cord that Steve worked on with Nordost. The results are simply amazing.

    October 1 2021 Update: Steve has now done further modifications to the Beat SE external power supply with internal wire upgrades with wiring from Nordost as well as adding an external grounding connection that enables me to ground the Beat SE power supply to my CAD GCR reference ground box.
    • Nordost Odin 2 Power Cord
    This Odin 2 power cord is used on the outboard power supply for The Beat SE turntable. This is plugged into the Shunyata Everest 8000 power conditioner.
    • Schroeder LT Tonearm with Magnesium arm tube
    I had my previous Schroeder LT tonearm with wood arm tube modified to the even better LT tonearm with Magnesium arm tube. It has the Lyra Olympus SL cartridge mounted on it and it is truly amazing to hear this combination. This arm has replaced the Reed 2A tonearm on my "Beat" turntable. The Olympus SL has never sounded anything like this.

    June 29 2021 Update: I have upgraded the LT arm cartridge mounting plate for my Lyra Atlas SL Lambda to a new one that consists of a carbon fiber top and bottom plate with a copper plate in the middle between the 2 carbon fiber layers.
    • Schroeder LT tone arm with Magenisum arm tube
    This is a new LT tonearm but now with an arm tube made from Magnesium instead of wood. It is a very significant upgrade in sonics. I plan to have my existing LT arm modified to have the Magnesium arm tube as well.
    • Lyra Atlas SL Lambda cartridge
    I have now replaced my wonderful Lyra Etna SL cartridge with the new Lyra Atlas SL Lambda cartridge. My previous experience was that the original Etna SL cartridge was the best sounding of all of the Lyra cartridges. But not any longer. I was fortunate enough to be able to compare the new Lambda versions of the Etna SL and the Atlas SL in my system and the Atlas SL Lambda is simply stunning to hear in my system. The new Lambda Etna SL is also wonderful and better than the original Etna SL, but the Lambda Atlas SL is superior in every way.
    • CH Precision True Dual Monaural P10 phono stage
    I have now upgraded my 4 box true mono CH P1/X1 phono stage to the CH Precision P10 4 box True Dual Monaural phono stage. 
    • Nordost Odin Gold Power Cords
    I am now using two of the Nordost Odin Gold Power Cords to power the two power supplies for the CH Precision P10 true dual monaural phono stage.
    • Nordost Odin 2 XLR IC
    I am now using Nordost Odin 2 balanced IC's between the CH Precision P10 true dual monaural phono stage and the CH Precision L10 true dual monaural preamp.
    • Computer Audio Design (CAD) GC3 Ground Controls
    I am using 2 of the CAD GC3 Ground Controls. One GC3 is used for signal ground with each of my CH Precision M10 amplifiers and the second GC3 is used for Earth Ground with my Rockport Arrakis external active crossover.
    • Computer Audio Design (CAD) Ground Control GCR
    I am using the CAD Ground Control Reference (GCR) in my system. This is used for signal grounds for my front end components and the earth ground for my Shunyata Everest 8000 power distributor.
    • CH Precision L10 True Dual Monaural LInestage
    The new CH Precision L10 True Dual Monaural linestage has replaced my long time reference, the CH Precision L1 true dual monaural linestage. As good as the 4 box version of the CH L1 linestage is, The CH Precision L10 True Dual Monaural (4 box) linestage surpasses it in every audio parameter.
    • Nordost Odin Gold Power Cords
    I am using two of the Nordost Odin Gold Power Cords to power the two CH Precision L10 external power supplies for my CH Precision L10 true dual monaural preamp.
    • CH Precision M10 amplifiers
    I now am using the CH Precision M10 mono block amplifiers. I have 2 of these and I run them in their active bi-amplification mode. These have just replaced (11/30/2021) my wonderful CH Precision M1.1 mono block amplifiers.
    • Nordost Odin Gold Power Cords (4)
    I am using 4 of the Nordost Odin Gold power cords on my CH Precision M10 amps. Each CH M10 amp outboard power supply requires 2 power cords each with 20 amp IEC connectors.
    • Nordost Odin 2 XLR IC
    I use a 9 meter run of Nordost Odin 2 XLR IC's from the CH Precision L10 true dual monaural preamp to the Rockport Arrakis 2 external crossover.
    • Rockport Technologies Arrakis 2 External crossover
    This is the active external crossover for the Rockport Arrakis 2 speaker. It takes the feed from the preamplifier and then splits the signal for the bass drivers and all of the upper frequency drivers.
    • Nordost Odin Gold Power Cord
    I am now using a Nordost Odin Gold power cord on my Rockport Arrakis external crossover. This replaced the already great Nordost Odin 2 power cord.
    • Nordost Odin 2 XLR IC
    I am now using 2 pairs of Nordost Odin 2 XLR IC's to connect the Rockport external crossover to the CH Precision M10 amplifiers.
    • Nordost Odin Gold Speaker Cables
    I am using 2 pairs of Nordost Odin Gold speaker cables  to bi-amplify the Rockport Arrakis 2 speakers.
    • Rockport Arrakis 2
    My speakers are the bi ampified version of the Rockport Arrakis 2 with the active external crossover.  I am driving the speakers with a pair of CH Precision M10 amplifiers run in active bi amplification mode.
    • Furutech GTX/NCF outlets
    I have 13 of the Furutech GTX/NCF outlets with the GTX outlet Frames and the 105D NCF Carbon Fiber outlet covers.
    • HRS SXR
    I have 3 of the HRS SXR audio racks. Each rack is a 4 shelf version and I am using M3X2 isolation bases with G7 footers. These racks and bases hold the majority of my front end components. For the SXR base that holds my Beat SE turntable, I have added the SXR solid brace insert.
    • HRS SRX with M3X2 isolation base
    I have 4 of the HRS SRX amp stands with the M3X2 isolation bases with G7 footers, These are for the power supplies and my CH Precision M10 amps.
    • Nordost Sort Kones
    I am now using Nordost Sort Kones under many of my components. I am using a combination of both the BC and TC sort kones. I am using them under all of my TotalDAC digital components - both DACs, the Outboard Reclocker, the Streamer, the Live Power supply, the D1 player and the NAS. I also use them under my Beat SE turntable outboard power supply (not the turntable itself) and my Rockport Arrakis external crossover.
    • Isonic Ultrasonic RCM
    I have added the Isonic ultrasonic RCM. This is a wonderful RCM. I can do up to 10 LP's at once. It doesn't dry the records - but that is simple to do on my Loricraft.
    • Custom LP Record Cabinets
    There are now 3 of these beautiful LP record cabinets that I commissioned a friend to build for me. Its so much easier to find the LP that I am looking for and to put it back than it was with more traditional shelves that I was using before.

Comments 694

Owner
Hi Albert,

It's definitely worth giving the Entreq Silver Tellus and the Eartha Atlantis cables a try in your system. It's available now in the US through Stillpoints.

Arnie

babybear

What is the retail price point on these high-end ground cables? Notice that Tripoint makes at least 3 levels; which is best and what are all the prices?

zephyr24069

Lloyd, you haven't heard the full potential of the Troy Signature until you hear Thor SE ground cable. As good as it gets.

himiguel

Congrats Arnie...great stuff! I am a big fan of Tripoint and Entreq and use both. Enjoy.

lloydelee21

Arnie,

Now I’m even more interested in adding an Entreq to my own system. It’s been on my radar for months, I need to move it up the priority chain.

albertporter

Owner
System edited: I've added the Entreq Silver Tellus signal grounding box along with 4 Eartha Atlantis grounding cables to my system. I am using 2 of the Atlantis cables connected to my Allnic H5000 phono stage, one to my digital front end and one to my Absolare preamp. The addition of the Entreq products in my system has a very positive effect in the following areas: 1. Lower noise floor 2. Greater clarity of subtle musical cues 3. Musical notes have greater density and weight to them. 4. The music just seems to flow more effortlessly.

babybear

Charles won't be there this year, but I have others with me and a car. Please let me know if you are going.

jwm

Owner
Hi Jeff,

There is a chance that I may be going to CES this year. If you are going, and I do make it there this year, it would be great to meet you ( and Charles if he is going). I will know soon if I can make it and let you know for sure.

babybear

I agree the bullets open up the sound up quite a bit.

jwm

Are you going to CES this year? Thanks Jeff

jwm

Owner
Hi David,

Yes, I do like what the Absolare Purifier does. I only use it for my front end gear - phono stage, dac and main preamp and it clearly makes an audible improvement to my ears. The Absolare speaker bullets also are very effective to me as well.

babybear

the absolare bybee purifier. sorry. i purchased one. at first i thought it was making things worse. now, i'm convinced better!

using with magico q-5 and dual devialet (along with continuum turntable).

next... the bullets!

davidhyman

Owner
Hi David,

Not sure which component you are referring to. Let me know.
Thanks

babybear

how do you like it? have you tried others?

getting mine next week.

davidhyman

Hello Babybear,

I would love the opportunity to hear your systems and get some feedback from you on building a dedicated room.

I live in Austin. You can email me

masongsong at hotmail dot com

Thanks,

Joshua

believehifi

Owner
Hi Dennis,

Austin

babybear

Where in Texas are you?

Dennis
D-Sonic

ddeacon

Owner
Hi John,

Thanks for coming by.

I am looking forward to hearing your system again with your cable upgrades and the Vivaldi DAC.

See you soon.

babybear

Thanks for having me over today...I always am amazed how your system sounds. The beauty and resolution in the midrange off your vinyl is awesome. Trust me, I listened to the same Eric Bibb when I got home...should have stayed at your place just a little longer :-) !!

jfrech

Owner
Hi Lloyd,

I do enjoy what my speakers are able to do!

babybear

That sounds great, Arnie...really great!!! I'd love to try the Absolares...but its your speakers that are my favourite part about your entire system!

lloydelee21

Owner
Hi Lloyd,

Thanks very much.

That's interesting about using the HRS Nimbus/Coupler on top of the Ultra 5. So far, with what I am hearing with the Absolare Stabilian footers, I am getting all of the detail, clarity, and transparency of the Ultra 5's, but with a more natural sound (basically, no metallic signature that I can now clearly hear with the Ultra 5 when I switch back to it). In addition, the Stabilian footers provide even better bass resolution than the Ultra 5's.

babybear

Hi Babybear,

Great reading!!! You've clearly been busy. Regarding your Ultra 5s...I had a very very long series of days/nights trying to maintain the tone of my system with them...while trying to hold onto every bit of huge detail, clarity and improved timing that the Ultra 5s delivered.

Eventually, I figured out that if I place an HRS Nimubs/ Coupler on top of each Ultra 5 and THEN place the component on top...I literally got the best of both worlds. I have spoken with 1 other audiophile who has tried this and I think he also decided to combine HRS with Ultra 5s.

YMMV but thought I would share what worked for me in case you're curious

lloydelee21

Owner
Thanks Albert,

You are most welcome to visit anytime.

With the changes, the performance has gone up, especially in the areas of overall transparency, resolution and bass impact.

babybear

Arnie,

Exciting news, I hope to hear your system again sometime in the near future. From reading about upgrades it appears to have taken another leap in performance.

albertporter

Displaying posts 176 - 200 of 694 in total